MONOBLOCK System

Linear drainage

ME15 channel
Polymer concrete inspection drain
Drainage well with a strainer basket
Open end cap with PVC connector
Full end cap
Connector for diversion of flow
Cast iron grating

General information:

Construction: One-unit, solid, monolithic (channel body + grate)
Three height versions: ME15.L00 (H=380mm), ME15.L10 (H=430mm), ME15.L20 (H=480mm)
Material: Polymer concrete
Inspection and cleaning: only through an inspection unit and drainage well
Grates in inspection units and drainage wells: ductile cast iron
Max. load class: E600 (without concrete apron), F900 (with concrete apron)
Built-in slope: 0.0% (non-sloped units).
Installation of units: must allow for min. 0.2% slope. Recommended slope min. 0.5%.

IMPORTANT: ME15 system should be installed in accordance with the manufacturer’s installation manual.

Functions of the system:
Collecting and disposing storm water from the surface of roads, streets and yards into a drain well and storm drainage network, a combined sewer system or directly to a collector situated behind the drain well.

Application scope:

Type “I” units - groups 1-5 of application areas with load class A15-E600 according to PN-EN 1433.
Type “M” units - group 6 of application areas with load class F900 according to PN-EN 1433.

Special area of application:
Because of its monolithic construction and the application of polymer concrete, this solution has unique functional properties which enable effective water collection in most extreme operational conditions. Especially recommended areas of application of the monolithic system are areas exposed to heavy operational load positioned transversally to vehicular traffic direction.

SYTEC channels

PRODUCT INDEX	HEIGHT H Z [mm]	HEIGHT H W [mm]	WIDTH D Z [mm]	WIDTH D W [mm]	LENGHT L [mm]
for ME15 channels
ME15.L00	380	260	210	150	1000
ME15.L10	430	310	210	150	1000
ME15.L20	480	360	210	150	1000

SYTEC inspection channel with protective edge

PRODUCT INDEX		HEIGHT H Z [mm]	HEIGHT H W [mm]	WIDTH D Z [mm]	WIDTH D W [mm]	LENGHT L [mm]
Universal cast iron edges	Cast iron edging strips F900
for ME15 channels
ME15.RP00U	ME15.RP00	380	360	210	150	500
ME15.RP10U	ME15.RP10	430	410	210	150	500
ME15.RP20U	ME15.RP20	480	460	210	150	500

SYTEC polymer concrete drainage wells with a galvanised steel strainer basket and cast iron COC grating

PRODUCT INDEX	LOAD CLASS	GRATING INSTALLATION METHOD*	OUTFLOW	HEIGHT H Z [mm]	WIDTH D Z [mm]	WIDTH D W [mm]	LENGHT L [mm]
for ME15 channels
ME15.SB00.2.Z.CK	C250	Screw fixed	It is possible to make an opening ф110 or ф160 or ф200 and mount a connector	765	210	150	500
ME15.SB00.2.S.CK		Snap fastened		765	210	150	500
ME15.SB00.2.U.CK		Double		765	210	150	500
ME15.SB10.2.Z.CK		Screw fixed		815	210	150	500
ME15.SB10.2.S.CK		Snap fastened		815	210	150	500
ME15.SB10.2.U.CK		Double		815	210	150	500
ME15.SB20.2.Z.CK		Screw fixed		865	210	150	500
ME15.SB20.2.S.CK		Snap fastened		865	210	150	500
ME15.SB20.2.U.CK		Double		865	210	150	500
ME15.SB00.3.Z.CK		Screw fixed		1125	210	150	500
ME15.SB00.3.S.CK		Snap fastened		1125	210	150	500
ME15.SB00.3.U.CK		Double		1125	210	150	500
ME15.SB10.3.Z.CK		Screw fixed		1175	210	150	500
ME15.SB10.3.S.CK		Snap fastened		1175	210	150	500
ME15.SB10.3.U.CK		Double		1175	210	150	500
ME15.SB20.3.Z.CK		Screw fixed		1225	210	150	500
ME15.SB20.3.S.CK		Snap fastened		1225	210	150	500
ME15.SB20.3.U.CK		Double		1225	210	150	500
ME15.SB00.2.Z.DK	D400	Screw fixed	It is possible to make an opening ф110 or ф160 or ф200 and mount a connector	765	210	150	500
ME15.SB00.2.S.DK		Snap fastened		765	210	150	500
ME15.SB00.2.U.DK		Double		765	210	150	500
ME15.SB10.2.Z.DK		Screw fixed		815	210	150	500
ME15.SB10.2.S.DK		Snap fastened		815	210	150	500
ME15.SB10.2.U.DK		Double		815	210	150	500
ME15.SB20.2.Z.DK		Screw fixed		865	210	150	500
ME15.SB20.2.S.DK		Snap fastened		865	210	150	500
ME15.SB20.2.U.DK		Double		865	210	150	500
ME15.SB00.3.Z.DK		Screw fixed		1125	210	150	500
ME15.SB00.3.S.DK		Snap fastened		1125	210	150	500
ME15.SB00.3.U.DK		Double		1125	210	150	500
ME15.SB10.3.Z.DK		Screw fixed		1175	210	150	500
ME15.SB10.3.S.DK		Snap fastened		1175	210	150	500
ME15.SB10.3.U.DK		Double		1175	210	150	500
ME15.SB20.3.Z.DK		Screw fixed		1225	210	150	500
ME15.SB20.3.S.DK		Snap fastened		1225	210	150	500
ME15.SB20.3.U.DK		Double		1225	210	150	500
ME15.SB00.2.Z.EK	E600	Screw fixed	It is possible to make an opening ф110 or ф160 or ф200 and mount a connector	765	210	150	500
ME15.SB00.2.S.EK		Snap fastened		765	210	150	500
ME15.SB00.2.U.EK		Double		765	210	150	500
ME15.SB10.2.Z.EK		Screw fixed		815	210	150	500
ME15.SB10.2.S.EK		Snap fastened		815	210	150	500
ME15.SB10.2.U.EK		Double		815	210	150	500
ME15.SB20.2.Z.EK		Screw fixed		865	210	150	500
ME15.SB20.2.S.EK		Snap fastened		865	210	150	500
ME15.SB20.2.U.EK		Double		865	210	150	500
ME15.SB00.3.Z.EK		Screw fixed		1125	210	150	500
ME15.SB00.3.S.EK		Snap fastened		1125	210	150	500
ME15.SB00.3.U.EK		Double		1125	210	150	500
ME15.SB10.3.Z.EK		Screw fixed		1175	210	150	500
ME15.SB10.3.S.EK		Snap fastened		1175	210	150	500
ME15.SB10.3.U.EK		Double		1175	210	150	500
ME15.SB20.3.Z.EK		Screw fixed		1225	210	150	500
ME15.SB20.3.S.EK		Snap fastened		1225	210	150	500
ME15.SB20.3.U.EK		Double		1225	210	150	500
ME15.SB00.2.Z.FK	F900	Screw fixed	It is possible to make an opening ф110 or ф160 or ф200 and mount a connector	765	210	150	500
ME15.SB00.2.S.FK		Snap fastened		765	210	150	500
ME15.SB00.2.U.FK		Double		765	210	150	500
ME15.SB10.2.Z.FK		Screw fixed		815	210	150	500
ME15.SB10.2.S.FK		Snap fastened		815	210	150	500
ME15.SB10.2.U.FK		Double		815	210	150	500
ME15.SB20.2.Z.FK		Screw fixed		865	210	150	500
ME15.SB20.2.S.FK		Snap fastened		865	210	150	500
ME15.SB20.2.U.FK		Double		865	210	150	500
ME15.SB00.3.Z.FK		Screw fixed		1125	210	150	500
ME15.SB00.3.S.FK		Snap fastened		1125	210	150	500
ME15.SB00.3.U.FK		Double		1125	210	150	500
ME15.SB10.3.Z.FK		Screw fixed		1175	210	150	500
ME15.SB10.3.S.FK		Snap fastened		1175	210	150	500
ME15.SB10.3.U.FK		Double		1175	210	150	500
ME15.SB20.3.Z.FK		Screw fixed		1225	210	150	500
ME15.SB20.3.S.FK		Snap fastened		1225	210	150	500
ME15.SB20.3.U.FK		Double		1225	210	150	500
ME15.SB.P	Intermediate segment			360	210	150	500

Accessories for ME channels

End caps for channels

PRODUCT INDEX	TYPE	INTENDED FOR HEIGHT H Z [mm]	INTENDED FOR CHANNELS OF INDEXES	WEIGHT [kg]
for ME15 channels
ME15.E00	Full	380	ME15.L00, ME15.RP00, ME15.RP00U	4,8
ME15.E10		430	ME15.L10, ME15.RP10, ME15.RP10U	5,6
ME15.E20		480	ME15.L20, ME15.RP20, ME15.RP20U	6,4
ME15.E00.O	Open with ф160 PCV connector	380	ME15.L00, ME15.RP00, ME15.RP00U	4,2
ME15.E10.O		430	ME15.L10, ME15.RP10, ME15.RP10U	5,0
ME15.E20.O		480	ME15.L20, ME15.RP20, ME15.RP20U	5,8

SYTEC connector for diversion of flow

PRODUCT INDEX	WIDTH D Z [mm]	INTENDED FOR HEIGHT H Z [mm]	WEIGHT [kg]
ME15.C00	210	380	3,7
ME15.C10	210	430	3,8
ME15.C20	210	480	3,9

Gratings COC

Grates and edges for polymer concrete inspection chamber and channel: Gratings COC

Grate	Material	Load class	Length [mm]	Edge type		Grating installation method		Water inlet surface area [cm2/pc]
Grate	Material	Load class	Length [mm]	Galvanised steel	Cast iron	Steel edge	Cast iron steel	Water inlet surface area [cm2/pc]
COC15.02	Cast iron SF	C250	500	VA20.20	VAP20.31	LB	LB/CL	351
COC15.03	Cast iron SF	D400	500	VA20.20	VAP20.31	LB	LB/CL	351
COC15.04	Cast iron SF	E600	500	VA20.20	VAP20.31	LB	LB/CL	282
COC15.05	Cast iron SF	F900	500	-	VAP10.31	-	CL	289

LB – bracket system ; CL – snap fastened

File name	File size
Technical Data Sheet ME15	1406 KB	download
Installation manual ME15 Asphalt pavement E600	32 KB	download
Installation manual ME15 Concrete pavement E600	32 KB	download
Installation manual ME15 Boulder pavement E600	32 KB	download
Installation manual ME15 Asphalt pavement F900	31 KB	download
Installation manual ME15 Concrete pavement F900	31 KB	download
Installation manual ME15 Boulder pavement F900	31 KB	download
Leaflet ME	8109 KB	download

Linear drainage

MONOBLOCK System

Linear drainage

ME15 - of inner width 150mm

Product photos

Company details

Address

contact